Etanol.nu

Forum för föreningen etanol.nu
Aktuellt datum och tid: tis 24-03-19 12:01

Alla tidsangivelser är UTC + 1 timme




Ny tråd Svara på tråd  [ 6 inlägg ] 
Författare Meddelande
 Inläggsrubrik: Carina e 107hp
InläggPostat: tis 08-07-08 21:47 
Offline

Blev medlem: tis 08-07-08 21:44
Inlägg: 3
Ort: Från
hello everybody,
has anyone here built then flexitune into the carina 1,8?

How does it work, how much does the fuel consumption increases?

And does anyone know, which flexitune i need

thanks for all,

dave


Dela på FacebookDela på TwitterDela på TuentiDela på SonicoDela på FriendFeedDela på OrkutDela på DiggDela på MySpaceDela på DeliciousDela på TechnoratiDela på TumblrDela på Google+
Upp
 Profil  
 
 Inläggsrubrik:
InläggPostat: tis 08-07-08 22:27 
Offline
Forummoderator

Blev medlem: tis 06-12-19 18:42
Inlägg: 4822
Ort: Sundsvall
What model year is it? And do you know the engine type designation? Typically, Toyota engines have a designation like 3S-FE, 4A-FE and so on.

_________________
Att mäta är att veta


Upp
 Profil  
 
 Inläggsrubrik:
InläggPostat: tis 08-07-08 22:31 
Offline

Blev medlem: tis 08-07-08 21:44
Inlägg: 3
Ort: Från
it is a 1995
1800ccm
Engine-Code is 7A-FE


Upp
 Profil  
 
 Inläggsrubrik:
InläggPostat: tis 08-07-08 22:42 
Offline
Forummoderator
Användarvisningsbild

Blev medlem: ons 07-01-03 13:14
Inlägg: 676
Ort: Halden/Asker/Trondhe
The engine appears to have injectors firing in two banks.
http://www.toyoland.com/engines/4A-F.html
As it is a semi-sequential system I presume you need a FT sequential. You should double check whether the information given above is correct and see what torbjorn has to say about it.

_________________
-Magnus-
"Six months in the lab will save you an afternoon in the library"


Upp
 Profil  
 
 Inläggsrubrik:
InläggPostat: ons 08-07-09 12:38 
Offline

Blev medlem: tis 08-07-08 21:44
Inlägg: 3
Ort: Från
Ok, i'll wait for his answer, but i thinks also i need the sequential

thanks for that


Upp
 Profil  
 
 Inläggsrubrik:
InläggPostat: ons 08-07-09 13:04 
Offline
Forummoderator

Blev medlem: tis 06-12-19 18:42
Inlägg: 4822
Ort: Sundsvall
The only Toyota injection system i have dealt with was on a 3S-FE engine from 1987-88. And that is, as mentioned in magnul's link, a system where all injectors are connected in parallel. Although the wiring in the car is laid out so that the injectors are connected in two groups, each supplied by a separate pin in the ECU's connector, both those pins are interconnected inside the ECU and controlled from one single power transistor.

So it is quite probable that a Toyota from 1995 has the injectors connected in at least two independent groups.

_________________
Att mäta är att veta


Upp
 Profil  
 
Visa inlägg nyare än:  Sortera efter  
Ny tråd Svara på tråd  [ 6 inlägg ] 

Alla tidsangivelser är UTC + 1 timme


Vilka är online

Användare som besöker denna kategori: Inga registrerade användare och 2 gäster


Du kan inte skapa nya trådar i denna kategori
Du kan inte svara på trådar i denna kategori
Du kan inte redigera dina inlägg i denna kategori
Du kan inte ta bort dina inlägg i denna kategori
Du kan inte bifoga filer i denna kategori

Sök efter:
Hoppa till:  
cron
POWERED_BY
Swedish translation by Peetra & phpBB Sweden © 2006-2011