Etanol.nu

Forum för föreningen etanol.nu
Aktuellt datum och tid: tis 24-03-19 08:40

Alla tidsangivelser är UTC + 1 timme




Ny tråd Svara på tråd  [ 5 inlägg ] 
Författare Meddelande
InläggPostat: tis 09-08-18 18:41 
Offline
Forumadministratör
Användarvisningsbild

Blev medlem: lör 06-12-23 09:31
Inlägg: 7134
Ort: Älvsjö
http://www.worldautosteel.org/Projects/ ... nload.aspx
http://www.worldautosteel.org/uploaded/ ... ilable.pdf

Intressant men inte oväntad att celluloseetanol vinner över hybrid också intressant (men helt logiskt) att se att ju bättre bränsle är ju större andelen av växthusgaser uppstår vid tillverkningen, ännu ett skäll till att inte skrota funktionsdugliga bensinbilar men etanolkonvertera de i stället!

Citat:
Automotive Materials Life Cycle Assessment Model Released for Use

Updated model evaluates the total vehicle life cycle impact of materials, powertrains, fuels and their sources, total energy consumed

WorldAutoSteel has released a 2nd iteration of the automotive materials parametric Life Cycle Assessment (LCA) model, which allows for broader evaluations of automotive materials, powertrains, fuels and vehicle total energy consumed. Automakers can now evaluate more comprehensively material selections decisions and their affect on green house gas emissions, with additional options for materials, emerging powertrains and fuel sources. The Phase 2 model was developed under the leadership of Dr. Roland Geyer of the University of California’s Bren School for Environmental Science.

The LCA approach assists automakers in evaluating and reducing the total energy consumed and the lifetime GHG emissions of their products. Regulations that consider only the vehicle use phase, or tailpipe emissions, can encourage use of low-density, GHG-intensive materials that provide somewhat lighter weight components. However, this may have the unexpected result of increasing GHG emissions during the vehicle’s total life cycle.

To investigate the aspects of material selection on automotive LCA GHG emissions, a study entitled The Impact of Material Choice in Vehicle Design on Life Cycle Greenhouse Gas emissions - The Case of HSS and AHSS versus Aluminium for BIW applications (see www.worldautosteel.org) was conducted at the University of California, Santa Barbara (UCSB) Bren School of Environmental Science and a Phase 1 model for material comparisons was developed. The study’s methodology was evaluated and approved by a peer review committee consisting of OEM scientists, University academicians, and a member of the Aluminum Institute
The Phase 2 LCA model is a successor to the Phase 1 model. Following the same methodology, the Phase 2 model has incorporated many new features and capabilities. Examples:

1) The original model allowed evaluation of three materials: conventional steel, Advanced High-Strength Steels (AHSS) and aluminium. The updated model adds magnesium and several composites to the materials that may now be evaluated for their emissions from manufacturing through use and end-of-life.

2) Advanced powertrains incorporated into the Phase 2 model are diesel and fuel cells.

3) It is now possible to evaluate the impact of bio-fuels and varying agricultural sources for the production of these fuels.

4) The model is now capable of producing an analysis of total energy consumed over a vehicle life cycle, to compliment the total green house gas emissions analysis.



An example of evaluations that can be conducted using the model are shown in Figure 1 following, which compares green house gas emissions for steel, aluminium and sheet moulding composite vehicle body structures incorporating these advanced technologies. As we move to the right with the comparison bars, total life cycle emissions decrease, which means that material production emissions contribute a greater percentage to the whole. Thus as these technologies are implemented in mainstream vehicle designs, the emissions from material production becomes relatively more important in the total life cycle. This places greater emphasis on the critical decisions required to choose low GHG-intensive materials such as steel to ensure that total life cycle GHGs also are reduced.



Figure 1: Life Cycle GHG’s, Varying By Materials, Powertrains and Fuel Sources
Bild


A key finding is that with reasonable assumptions and inputs for the specific application and manufacturing processes, the material production phase can be a significant percentage of the vehicle’s total carbon footprint. In fact, it becomes even more important as the vehicle’s footprint is diminished through advanced powertrains and fuel sources.

Regardless of all reasonable inputs, the impact of material production and recycling on LCA GHG emissions are relatively small compared to total emissions, and significant improvements in reducing automotive GHG emissions will not be made by material substitution alone.

The Phase 2 model is fully parameterized, and developed using a Microsoft Excel spreadsheet, making it very user-friendly. Users can download the model free for use in conducting their own evaluations. Just click the link here.

_________________
Komplettera gärna data om dit piggybacksystem här: http://www.editgrid.com/user/aryan/E85_piggyback_system och här viewtopic.php?f=10&t=6352


Dela på FacebookDela på TwitterDela på TuentiDela på SonicoDela på FriendFeedDela på OrkutDela på DiggDela på MySpaceDela på DeliciousDela på TechnoratiDela på TumblrDela på Google+
Upp
 Profil  
 
InläggPostat: ons 09-08-19 05:47 
Offline

Blev medlem: ons 08-06-25 08:21
Inlägg: 488
Ort: Filippinerna
Och var hamnar en vanlig elbil med batteri? 'Fuel Cell' hamnar ju ganska högt men det kan bero på att vätgasen framställs genom elektrolys med kolel som källa.

mvh/BP


Upp
 Profil  
 
 Inläggsrubrik:
InläggPostat: ons 09-08-19 08:35 
Offline
Forumadministratör
Användarvisningsbild

Blev medlem: lör 06-12-23 09:31
Inlägg: 7134
Ort: Älvsjö
Jag saknar etanolbilen på sockerrörsetanol och biogasbilen.

Men vad menar du med en vanlig elbil, det är väl en contradictio in terminis?
Det är väl bara att ladda ner modellen och försöka få reda på vad olika batteritillverkningen ger för växthusutsläpp och sedan göra några beräkningar med olika elmixar.

Snittet för världens elproduktion är ca 40% kol, 20% naturgas, 16% kärnenergi, 16% vattenkraft enl IEA det är väl det man räknat på med fuelcellen.

/Aryan

_________________
Komplettera gärna data om dit piggybacksystem här: http://www.editgrid.com/user/aryan/E85_piggyback_system och här viewtopic.php?f=10&t=6352


Upp
 Profil  
 
 Inläggsrubrik:
InläggPostat: ons 09-08-19 21:08 
Offline

Blev medlem: ons 08-06-25 08:21
Inlägg: 488
Ort: Filippinerna
aryan skrev:
Jag saknar etanolbilen på sockerrörsetanol och biogasbilen.

Men vad menar du med en vanlig elbil, det är väl en contradictio in terminis?
Det är väl bara att ladda ner modellen och försöka få reda på vad olika batteritillverkningen ger för växthusutsläpp och sedan göra några beräkningar med olika elmixar.

Snittet för världens elproduktion är ca 40% kol, 20% naturgas, 16% kärnenergi, 16% vattenkraft enl IEA det är väl det man räknat på med fuelcellen.

/Aryan

-------------------
Jo. Men bränslecellen förbrukar vanligen vätgas. Som vanligen är framställd genom elektrolys av vatten. En elkrävande process; det är effektivare att lagra elen i batteri i stället för att sedan utnyttja den direkt.

Bränslecellen är ett skämt ur energisynpunkt. Såvida man inte råkar ha tillgång till vätgas från andra källor än elektrolys av vatten.

Men visst skall batteritillverkningen med i analysen.

mvh/BP


Upp
 Profil  
 
Visa inlägg nyare än:  Sortera efter  
Ny tråd Svara på tråd  [ 5 inlägg ] 

Alla tidsangivelser är UTC + 1 timme


Vilka är online

Användare som besöker denna kategori: Inga registrerade användare och 3 gäster


Du kan inte skapa nya trådar i denna kategori
Du kan inte svara på trådar i denna kategori
Du kan inte redigera dina inlägg i denna kategori
Du kan inte ta bort dina inlägg i denna kategori
Du kan inte bifoga filer i denna kategori

Sök efter:
Hoppa till:  
POWERED_BY
Swedish translation by Peetra & phpBB Sweden © 2006-2011